Panasonic SX-KN2600 - Manual (Page 72)

Part III Peformance Pads
72
QQTG0692
Pe
rfo
rma
nc
e
Pa
ds
PLAY SETTING
Select a playback mode.
1. On the PAD RECORDING display, press the
PLAY SETTING button.
• The display looks similar to the following.
2. Use the START
∧
and
∨
buttons to select a
playback mode.
SYNCHRO:
During a rhythm performance, the phrase
playback begins in time with the measure.
INSTANT:
The phrase starts to play immediately when
the pad button is pressed, regardless of the
rhythm.
3. Use the LOOP
∧
and
∨
buttons to enable or
disable loop playback.
ON:
Once the pad button is pressed, the phrase
is played back repeatedly until the STOP
button is pressed.
OFF:
The phrase is played back only once.
CHORD STEP RECORD
A chord progression can be stored in PAD 5 and
PAD 6.
1. On the REALTIME RECORDING display,
press the CHORD STEP RECORD button.
• The display looks similar to the following.
2. Use the CURSOR buttons to move the cur-
sor to the position you wish to input.
• The cursor moves in 1/8-note increments.
3. Input the chord by playing it on the keyboard.
• The chord name is shown.
4. Press the OK button.
5. Repeat steps 2 to 4 to store the rest of the
chord progression.
• To delete a chord which has been input, move
the cursor to the specific chord and press the
ERS button.
08_Part III.fm 72 ページ ２００３年２月５日 水曜日 午後１時３１分