Panasonic SX-KN2600 - Manual (Page 74)

Part IV Sequencer
74
QQTG0692
Se
qu
en
ce
r
SEQUENCER menu
The configuration of the SEQUENCER setting
display is as follows.
1. Press the PROGRAM MENUS button to turn it
on.
• The display looks similar to the following.
2. Select SEQUENCER.
• The display looks similar to the following.
(KN2600)
• The SONG
∧
and
∨
buttons are used to select
a song.
• You can press the NAMING button and assign
a name to the song. (Refer to page 83.)
• You can press the PANEL WRITE button to
store the current settings of the instrument at
the beginning of the song. (Refer to page 83.)
• KN2600: Pressing the SD AUDIO SYNCHRO
button will set the synchronization of the
SEQUENCER playback and the sound data
stored in the SD card. (Refer to page 103.)
3. Select RECORD & EDIT, COPY & PASTE or
RANGE SET, and follow the corresponding
procedure.
<RECORD & EDIT>
<COPY & PASTE>
<RANGE EDIT>
PROGRAM
MENUS
09_Part IV.fm 74 ページ ２００３年２月５日 水曜日 午後１時３４分