Panasonic CQ-C1305L - Manual (Page 7)

Preparation
1
Set your car’s ignition switch to the ACC or
ON position.
2
Press [SOURCE] (PWR: Power).
C C A
N O
First T
ime Power On
Batter
y Installation
Clock Setting
The 12-hour system is used for the clock.
1
Press [DISP].
(clock display)
2
Hold down [DISP] for more than 2 seconds.
Hour blinks
3
Adjust the hour.
Hour entered
[ ]: sets the hour ahead.
[ ]: sets the hour back.
4
Press [DISP].
Minute blinks
5
Adjust the minute.
Minute entered
[
]: sets the minute ahead.
[ ]: sets the minute back.
6
Press [DISP].
Completed
Notes:
• “ADJUST” is displayed before adjusting the clock.
• Hold down [
] or [] to change numbers rapidly.
Clock Display at Power Off
Press [DISP] to change the display.
Display off
Clock display
CQ-C1335U CQ-C1335L
Pull the insulation fi lm out from the backside of the remote
control gently.
Note: Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included in
the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)