Panasonic AJ-HD130DCP - Manual (Page 29)

29
400 STILL TIMER 0000
0001
0002
0003
0004
0005
0006
0007
0008 0.5S
5S
10S
20S
30S
40S
50S
1min
2min
For setting the time taken before the unit is set to the tape protection mode
when it has been left in the STOP or STILL mode.
(Unit: S = seconds, min: minutes)
401 SRC PROTECT
0000
0001 STEP
HALF
For setting the tape protection mode operation when the unit has been left
in the STILL mode.
0: STEP FWD
1: STANDBY OFF (half loading)
<Note>
When STEP FWD has been set, the unit is automatically transferred to the
STANDBY OFF (half loading) mode when it has been left in the STILL
mode for a total of 30 minutes.
403 STOP PROTECT
0000
0001 STEP
HALF
For setting the tape protection mode operation when the unit has been left
in the STOP mode.
0: STEP FWD
1: STANDBY OFF (half loading)
<Note>
When STEP FWD has been set, the unit is automatically transferred to the
STANDBY OFF (half loading) mode when it has been left in the STOP
mode for a total of 30 minutes.
402 DRUM STDBY
0000
0001 OFF
ON
For setting the drum operation in the STANDBY OFF (half loading) mode.
0: The drum stops rotating.
1: The drum continues to rotate.
TAPE PROTECT
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.
Setup Menus
202 ID SEL
0000
0001
0002 OTHER
DVCPRO
ORIG
For setting the ID information to be returned to the controller.
0: 20 25H is returned.
1: The ID (F0 33H) unique to the DVCPRO is returned.
2: The ID (A0 51H) unique to the unit is returned.
INTERFACE
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.