Panasonic AJ-HD130DCP - Manual (Page 39)

39
Specifications
[GENERAL]
Supply voltage: AC 120 V ±10%, 50 – 60 Hz
Power consumption: 97 W
DC supply voltage: 12 V
DC power input current: 6.1 A
Ambient operating temperature:
41°F to 104°F (5°C to 40°C)
Ambient operating humidity:
10 to 85% (no condensation)
Weight:
18.04 lb (8.2 kg)
Dimensions (W
a
H
a
D):
8 7 /
16
˝ a 5 1 /
4
˝ a 16 15 /
16
˝ (214 a 132 a 430 mm)
Recording format:
DVCPRO HD
Recording video signals:
1080i/59.94 Hz, 720p/59.94 Hz, selectable
Recording audio signals:
48 kHz, 16 bits, 8 channels
Recording tracks
O
Digital video/audio: helical tracks
O
Time code: helical tracks (sub-code area)
O Cue signal: 1 track
O
Control (CTL): 1 track
Tape speed:
135.28 mm/sec
Recording time:
46 minutes (with AJ-HP46LP)
Tape used:
Metal tape
FF/REW time:
Less than 4 minutes (with AJ-HP46LP)
[VIDEO]
$
Digital video
Sampling frequency:
Y : 74.25/1.001 MHz
P
B
/P
R
: 37.125/1.001 MHz
Quantizing:
8 bits
Video compression system:
DCT + variable-length code
Video compression rate:
1/6.7
Error correction:
Reed Solomon product code
Video recording bit rate:
100 Mbps
$
Video input connectors
HD serial digital input:
BNC a 1,
(compliant with SMPTE 292M/296M standard)
Reference input:
Automatic switching between analog composite
and HD tri-level sync (59.94 Hz),
BNC
a
2 (loop-through), 75
Ω
ON/OFF switchable
$
Video output connectors
HD serial digital outputs:
BNC
a
2
(compliant with SMPTE 292M/296M standard)
SD serial digital output (down-converter):
BNC
a
1
(compliant with SMPTE 259M-C standard)
Analog composite outputs (down-converter):
BNC
a
2, VIDEO 1, VIDEO 2 (superimposing
ON/OFF)
$
Video output adjustment range
HD serial digital output system phase:
±0.5 H (±550 samples, 27 ns steps)
SD serial digital/composite video output system
phase:
±0.5 H (±429 samples, 74 ns steps)
Composite video output SC phase:
±180°