Panasonic FT-LB10NTU - Manual (Page 16)

16
Computer operations
Insert the optional wireless card into the computer.
(See page 14)
1
Turn on the computer.
2
Select [Start] → → [Programs] → → [Panasonic Wireless
Display] → → [Wireless Manager mobile edition].
• Wireless Manager ME starts up, and the connection select window shown
below appears.
3
Select the connection and click [OK].
The launcher shown below appears and the connection with the projector is
established.
4
Simple Wireless Connection (Using the Initial Settings)
(cont.)
Notes:
• The initial network number setting for both the projector and the computer is “1”.
These numbers must match for the connection.
• Depending on the computer and wireless card used, automatic setup may not be
possible. If this is the case, the [Network] setting on the screen in step 3 above
will be switched to [USER] automatically. For details of the connection procedure,
first close Wireless Manager ME, and then refer to page 30.