Panasonic FT-LB10NTU - Manual (Page 26)

26
Adding and deleting connections
Click [ADD] and enter the IP address
(including its periods) of the connection
to be added, and then click [REGISTER].
The newly registered connection is added to the
connection list in the window shown in step 1.
2
Click [Designate] at the
connection select window.
The window shown to the right appears.
1
Using Wireless Manager ME
(cont.)
When [Network] is set to [USER] at the connection select window, connections can be
added and deleted by the following operations.
■ Adding a connection
When a projector with the [ ] mark is selected, the window
shown to the right appears. Enter the password and click [OK].
Operations when password entry is required for connection
■ Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
Notes:
• Click [CANCEL] at the password entry window to return to launcher (See page 16).
• When an incorrect password is entered, an error message appears. Click [OK] to
return to the password entry window and enter the correct password again.