Panasonic FT-LB10NTU - Manual (Page 44)

44
Using the ET-CDWL2U (Optional wireless card)
(cont.)
The Wireless LAN Driver must be installed in order for the wireless card to be used in
the computer.
• The example of the procedure described below is for installing the ET-CDWL2U card.
• Some windows appear in English.
■ Installing the Wireless LAN Driver
Notes:
• Be sure to install the Wireless LAN Driver in the computer before inserting the
wireless card into the computer.
• If you insert the card into the computer by mistake before installing the driver, the
card is recognized by the hardware auto detect function as an unknown device.
Perform the following operations with the card inserted and then install the driver.
Windows XP/2000: Open [Control Panel]
→ [System] → [Hardware] →
[Device Manager], and delete the unknown device or
“Panasonic Wireless LAN PC Card”.
Windows 98SE/Me: Open [Control Panel]
→ [System] → [Device Manager],
and delete the unknown device or “Panasonic Wireless
LAN PC Card”.
Place the supplied CD-ROM in the CD-ROM drive.
If the installation window is displayed, click [Close].
1
Select [Start]
→ → [Run].
2
Enter [e:\CDWL2\setup.exe] in the [Open] field, and
click [OK].
This example assumes that the E: is the name of the CD-ROM drive.
If it is not, replace the first “e” with the correct letter that represents the drive.
3