Panasonic FT-LB10NTU - Manual (Page 14)

14
Removal
Insertion
Shut down Wireless Manager ME if it is in use.
Click the [PC card] icon displayed in the task bar at the lower right of
the screen.
When the [PC card] icon is not displayed:
Open [Start]
→ [Control Panel] → [PC card], place a check in the [Show
control on the task bar] checkbox, and then click [OK].
Select [Panasonic Wireless LAN PC Card] and click [Stop].
Click [OK] and remove the wireless card.
3
2
1
Mount the card in the
adapter.
Insert the adapter into
the PC card slot of the
computer. 2
1
• Be sure to install the Wireless LAN Driver before inserting the card.
(See page 10 or page 43)
• The example given here describes the insertion of the ET-CDWL3U or ET-
CDWL2U card.
When using a different card, refer to the user’s manual for that card.
• Be sure to also read the user’s manual for the computer.
• Attempting to force in the wireless card facing the wrong direction may result in
malfunction.
1
2
Inserting and Removing the Wireless Card to and from a Computer