Panasonic FT-LB10NTU - Manual (Page 18)

18
Using Wireless Manager ME
Description of the connection select window
When the network number to be
connected differs, select the
network number to be connected.
The network settings change
according to this selection.
This network number is stored in
the computer, so connection is
performed with the current
number the next time Wireless
Manager ME is started up.
This indicates the number of people connected to this
projector.
This indicates the status of this projector.
This appears when password entry is needed for connection.
(See page 26)
Projector name
Projector unique ID
The equipment to be connected can be designated when [Network]
is set to [USER].
Click this to display the projector name at the upper left of the
projection screen for the projector in question.
Startup
Select [Start] → → [Programs] → → [Panasonic Wireless Display]
→ → [Wireless Manager mobile edition].
Note:
With Windows Me or Windows 98SE, [1] or [USER] is the only available selection
option for the network number.