Panasonic FT-LB10NTU - Manual (Page 20)

20
Live mode
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted). 1
Click [ ] on the launcher.
The current computer screen is transmitted to the selected projector. In the live
mode the projector is occupied by a single computer, so operations from other
computers are not possible.
2
■ Quitting live mode
Click [ ] on the launcher.
Using Wireless Manager ME
(cont.)
Note:
For presentations in full-screen live mode, the [
] buttons on the remote control
will function in the same way as the computer’s up and down keys. This means that
if you run a computer application that supports the [
]buttons, the presentation
screen can be changed using the remote control.
Note:
Whether to keep the last image in the projector or clear it after quitting live mode
can be set as an option. (See page 25)