Panasonic KX-TG2584S - Manual (Page 45)

Cordless Telephone
45
For assistance, please call: 1-800-211-PANA(7262)
3 Enter a name, up to 15 characters, with the
dialing buttons,
(fi) or (fl) .
≥ See the steps for entering names and symbols
(p. 46).
≥ If a name is not required, press
(›)
( Next
key) and go to step 5.
4 Press (›) ( Next key).
5 Enter a phone number, up to 22 digits.
≥ Each time you press
(CLEAR/INTERCOM/HOLD)
, a digit is erased.
To erase all of the digits, press and hold
(CLEAR/INTERCOM/HOLD)
.
≥ To move the cursor, press (fi) or (fl) .
6 Press (›) ( Next key).
≥ If you want to change the storing name or
number, press
(‹)
( Edit key) repeatedly to
reach the desired display and change it.
7 Press (fl) ( Save key).
≥ A beep sounds.
≥ To continue storing other items, repeat from
step 2.
≥ To exit the programming mode, press (OFF) .
≥ If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 58) in step 5.
≥ You can exit the programming mode any time by pressing
(OFF)
.
≥ If the display shows “ Directory full ” in step 2, the display will return to
step 1. Press (OFF) to exit the list. To erase other stored items from the
directory, see page 51.
≥ After the maximum of 50 items has been stored, “ Directory full ” is also
displayed.
≥ If an alarm tone sounds in step 7, the item cannot be stored in the directory.
Press
(OFF) and try again from step 1.
Enter name
Tom Jones
21 4 =Next
Enter phone no.
0987654321
21 4 =Next
Tom Jones
098-765-4321
3 =Edit 1 =Save
Tom Jones
098-765-4321
Enter name
21 4 =Next
“