Panasonic KX-TG2584S - Manual (Page 81)

Useful Information
81
For assistance, please call: 1-800-211-PANA(7262)
Troubleshooting
“
Problem
“ No link to base.
Walk closer to base &
try again ” is displayed on
the cordless handset display
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The cordless handset does
not ring.
The cordless handset
display is blank.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
Cause and Remedy
≥ You are too far from the base unit.
Move closer and try again.
≥ Raise the base unit antennas.
≥ Plug in the AC adaptor of the base unit.
≥ The cordless handset may lose
communication with the base unit.
Set the security code (p. 60).
≥ Locate the cordless handset and the
base unit away from other electrical
appliances (p. 3).
≥ Move closer to the base unit.
≥ Raise the base unit antennas.
≥ Press (fi) to select a clearer channel in
the talk, intercom or remote operation
mode.
≥ The ringer volume is set to OFF. Set to
HIGH or LOW (p. 20).
≥ Charge the battery fully (p. 11).
≥ You cannot store an item in the
directory while the base unit is in the
talk or intercom mode, or while the
answering system is in use.
≥ Do not pause for over 60 seconds while
storing.
≥ To answer the call, press . Start
again from the beginning after hanging
up.
Cordless handset