Panasonic KX-TG2584S - Manual (Page 53)

Cordless Telephone
53
For assistance, please call: 1-800-211-PANA(7262)
5 Press (fl) ( Yes key).
6 Enter a phone number, up to 22 digits.
≥ Each time you press
(CLEAR/ERASE)
, a digit
is erased. To erase all of the digits, press and
hold
(CLEAR/ERASE)
.
≥ To move the cursor, press
(fi)
or
(fl)
.
7 Press (›) ( Next key).
8 Press (fl) ( Save key).
≥ A beep sounds.
≥ To store other numbers, repeat from step 4.
≥ To exit the programming mode, press
(EXIT/STOP)
.
≥ If a pause is required for dialing, (PAUSE) can be stored in a phone number
counting as one digit (p. 58) in step 6.
≥ You can exit the programming mode any time by pressing (EXIT/STOP) .
To erase a stored number
Repeat steps 1 through 5
¤
press and hold (CLEAR/ERASE) until all of
the digits are erased
¤ (›) ( Next key)
¤ (fl) ( Save key).
Dialing (Base\Unit)
1 Press the required DIRECT button ( (DIRECT1) , (DIRECT2) or
(DIRECT3)
) .
≥ If 3 beeps sound, you have not stored the phone numbers in the DIRECT
buttons. Store the number.
≥ The DIGITAL SP-PHONE indicator lights.
≥ The stored number is dialed.
≥ Numbers stored in the base unit can only be dialed by the base unit.
≥ You can also dial the stored number by pressing
(DIGITAL\SP-PHONE)
or lifting
the handset then pressing the DIRECT button.
1234567890 ¢ P
3 =Edit 1 =Save
1234567890 ¢ P
Save DIRECT2
21 4 =Next
1234567890 ¢ P
21 4 =Next