Precor 9.35 - Manual (Page 12)

Owner’s Manual: Treadmill Safety Features 10
Entering the Safety Code
The treadmill provides a safety code to help prevent
unauthorized use. You have the option to enable or disable
the feature using the OPTIONS key. Refer to Setting Display
Preferences Before Exercising.
At the safety code prompt, press the following number
sequence: 1, 2, 3, 4.
An asterisk appears on the display with each key press. If a
key is not pressed within 30 seconds or the correct safety
code is not entered within two minutes, the Precor banner
appears on the display and the running belt does not move.
Important: Do not assume the treadmill is safe because of
safety code protection. Never leave children unsupervised
around the treadmill. Always turn Off and unplug the
treadmill when it is not in use.
Using the Handrails
To maintain your balance, always grasp a handrail extension
when you step on or off the treadmill, and when you use the
keypad.
To learn more about the touch-sensitive handrail grips, refer
to Heart Rate Features.
Turning the Unit On and Off
To turn the unit On and Off, use the power switch located at
the front of the unit, near the power cord connection. Refer
to Diagram 5.
Important: When it is not being used, turn the unit Off.
Diagram 5: Power switch
Power switch