Precor 9.35 - Manual (Page 31)

Owner’s Manual: User Identification 29
Adding a User
To add a user, select a user number by taking the following
steps:
1. At the Precor banner, press a USER key. A blinking line
prompts you to enter the first letter in your name.
2. Use the alphabet, on the number keypad, to enter your
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
3. Wait until the next cell blinks and continue the process
until your name or identification is complete.
Note: Blank spaces between letters are not allowed.
4. When you are satisfied with your name or user
identification, press OK.
5. The display then prompts you to enter your weight, age,
and gender.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
the gender type prompt, the display indicates that the
user setup is complete and resets to the Precor banner.
Note: The treadmill retains entries even if you exit the
user setup process prior to answering all the prompts.
When you press the same USER key, the setup process
is initiated and the prompts display your existing entries.
Press OK to accept each entry and move on to the next
prompt.
To begin an exercise session using your USER key, refer to
Selecting a USER key.