Panasonic PT-DW90XE - Manual (Page 49)

Basic operations using the remote control
ENGLISH -
49
Basic Operation
Changing the picture aspect
ratio
You can toggle through an appropriate set of aspect
ratios for a given input signal.
button
Press <ASPECT> button on the remote
control.
The setting will change as follows each time z
<ASPECT> button is pressed.
VID AUTO *1
DEFAULT S1 AUTO *3
VID AUTO
(PRI.) *3
AUTO *2
THROUGH
HV FIT
16 : 9
V FIT H FIT 4 : 3
VIDEO/S-VIDEO (NTSC) only *1 :
RGB1/RGB2 (480i, 480p) only *2 :
S-VIDEO (NTSC) only *3 :
Note
Some aspect ratios may not be available for selection z
depending on the input signal.
Refer to “ASPECT” of “POSITION menu” ( Æ page 59) for
details.