Panasonic PT-DW90XE - Manual (Page 56)

PICTURE menu
56
- ENGLISH
Settings
Press ▲▼◄► to select characters 5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
6.
press <ENTER> button.
The color temperature setting name is changed. z
GAMMA
This switches the gamma mode.
Press ▲▼ to select [GAMMA]. 1 )
Press ◄► or <ENTER> button. 2 )
The [GAMMA] individual adjustment screen will z
be displayed.
Press ◄► to switch [GAMMA]. 3 )
The setting will change as follows each time z
◄► is pressed.
DEFAULT * USER1
2.8 USER2
DICOM SIM.
1.0
2.0 1.8
[DEFAULT] cannot be selected when the : Û
[PICTRUE MODE] has been set to [DYNAMIC],
[USER] or [DICOM SIM.].
Note
DICOM is an abbreviation for “Digital Imaging and z
Communication in Medicine”, which is a standard for
medical imaging devices.
This projector is not a medical device. Do not use the
displayed image for diagnosis.
Changing the name of [USER1]
J
or [USER2]
Select [USER1] or [USER2] in step 3). 1.
Press <ENTER> button. 2.
The [GAMMA] screen will be displayed. z
Press ▲▼ to select [GAMMA NAME 3.
CHANGE].
Press <ENTER> button.
4.
The [GAMMA NAME CHANGE] screen will be z
displayed.
Press ▲▼◄► to select characters 5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
6.
press <ENTER> button.
The gamma selection name is changed. z
SYSTEM DAYLIGHT VIEW
This corrects images so that they appear vivid when
projected under bright lighting.
Press ▲▼ to select [SYSTEM 1 )
DAYLIGHT VIEW].
Press ◄► or <ENTER> button.
2 )
The [SYSTEM DAYLIGHT VIEW] individual z
adjustment screen will be displayed.
Press ◄► to switch [SYSTEM 3 )
DAYLIGHT VIEW].
The setting will change as follows each time z
◄► is pressed.
OFF (No correction) 1 (Low)
3 (High) 2 (Medium)
(in units of 0.1)
GAMMA NAME CHANGE