Panasonic PT-DW90XE - Manual (Page 53)

PICTURE menu
ENGLISH -
53
Settings
PICTURE menu
See “Navigating through the menu” z
( Æ page 50).
See “MAIN MENU” and “SUB MENU” z
( Æ page 51).
PICTURE MODE
The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select [PICTURE MODE]. 1 )
Press ◄► to switch [PICTURE MODE]. 2 )
The setting will change as follows each time z
◄► is pressed.
STANDARD CINEMA NATURAL
USER DICOM SIM.
GRAPHIC DYNAMIC
STANDARD The picture becomes suitable for
moving images in general.
CINEMA
The picture becomes suitable for
movie sources.
NATURAL The picture complies with sRGB.
DICOM SIM. The picture becomes similar to
DICOM Part14 gray scale.
DYNAMIC
The light output is maximized for use
in bright areas.
GRAPHIC
The picture becomes suitable for
input from to the personal computer.
USER
You can set your favorite picture
mode.
Note
Factory defaults are [GRAPHIC] for RGB system and z
[STANDARD] for moving images.
DICOM is an abbreviation for “Digital Imaging and z
Communication in Medicine”, which is a standard for
medical imaging devices. Although the name “DICOM” is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
When <ENTER> button is pressed while a [PICTURE z
MODE] other than [USER] is selected, the setting is
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.
The factory default of [USER] is the image conformed to z
ITU-R BT.709 Standard.
Changing the name of [USER]
J
Select [USER] in step 2). 1.
Press <ENTER> button. 2.
A screen showing details of the [PICTURE z
MODE] will be displayed.
Press ▲▼ to select [PICTURE MODE 3.
NAME CHANGE].
Press <ENTER> button.
4.
The [ z PICTURE MODE NAME CHANGE]
screen will be displayed.
Press ▲▼◄► to select characters 5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
6.
press <ENTER> button.
The picture mode name is changed. z
PICTURE MODE NAME CHANGE