Panasonic PT-DW90XE - Manual (Page 75)

DISPLAY OPTION menu
ENGLISH -
75
Settings
OSD DESIGN
J
This sets the color of the on-screen display (OSD).
1 : Yellow 2 : Blue
6 : Brown 3 : White
5 : Pink 4 : Green
OSD MEMORY
J
The current menu cursor position will be retained
temporarily unless the projector switched off.
ON OFF
INPUT GUIDE J
This sets whether to display the currently
selected input guide at the position set for [OSD
POSITION].
ON OFF
WARNING MESSAGE
J
This sets the display of warning messages.
ON OFF
BACK COLOR
This sets the color for the projection screen when no
signals are being input.
Press ▲▼ to select [BACK COLOR]. 1 )
Press ◄► to switch [BACK COLOR]. 2 )
The setting will change as follows each time z
◄► is pressed.
BLUE BLACK
LOGO2 LOGO1
BLUE
The entire projection area will
appear blue.
BLACK
The entire projection area will
appear black.
LOGO1
The picture registered by the user
will be projected in the projection
area.
LOGO2 The Panasonic logo is projected.
Note
Separate software is required in order to create the z
pictures to use for [LOGO1]. Consult your dealer.
STARTUP LOGO
This sets the startup logo that is projected when the
power is turned on.
Press ▲▼ to select [STARTUP LOGO]. 1 )
Press ◄► to switch [STARTUP LOGO]. 2 )
The setting will change as follows each time z
◄► is pressed.
LOGO2 NONE LOGO1
LOGO2 The Panasonic logo is projected.
NONE No startup logo is projected.
LOGO1
The picture registered by the user
will be projected.
Note
Separate software is required in order to create the z
pictures to use for [LOGO1]. Consult your dealer.
STARTUP LOGO will be displayed for 15 seconds. z
FREEZE
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press ▲▼ to select [FREEZE]. 1 )
Press <ENTER> button. 2 )
Press <MENU> button to escape. z