Save all user data, Load all user data, Initialize – Panasonic PT-DW90XE User Manual
Page 87: Service password, Initialize” of “projector setup, Menu, Projector setup menu, English
PROJECTOR SETUP menu
ENGLISH -
87
Settings
SAVE ALL USER DATA
This saves various setting values as a backup to the
internal memory of the projector.
Press ▲▼ to select [SAVE ALL USER
1 )
DATA].
Press <ENTER> button.
2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the
3 )
[SECURITY PASSWORD].
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
4 )
<ENTER> button.
LOAD ALL USER DATA
This loads various setting values that were saved as a
backup to the internal memory of the projector.
Press ▲▼ to select [LOAD ALL USER
1 )
DATA].
Press <ENTER> button.
2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the
3 )
[SECURITY PASSWORD].
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
4 )
<ENTER> button.
Note
If this is executed, the projector enters a standby state in
z
order to reflect the setting values.
INITIALIZE
This returns various setting values to their factory
default settings.
Press ▲▼ to select [INITIALIZE].
1 )
Press <ENTER> button.
2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the
3 )
[SECURITY PASSWORD].
The [INITIALIZE] screen will be displayed.
z
Press ▲▼ to select the desired
4 )
initialize item.
ALL USER
DATA
All setting values including [ENTRY
SIGNAL], [NETWORK/E-MAIL], and
[LOGO IMAGE] are returned to their
factory default values.
The projector enters a standby state
in order to reflect the setting values.
ENTRY
SIGNAL
All setting values saved for each of
the input signals are cleared.
To clear just some registered
signals, perform the procedure
described in “Deleting a registered
NETWORK/
All setting values in [NETWORK
SETUP] and [E-mail setup] settings
will return to factory settings.
LOGO IMAGE
The registered image data for
[LOGO1] will return to factory
settings.
Press <ENTER> button.
5 )
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
6 )
<ENTER> button.
SERVICE PASSWORD
This function is used by a service person.