Panasonic AG-HVX200 - Manual (Page 26)

26
P2 card access lamp
Protecting against a possible erasure
Switch the write-protect switch of the P2 card to
[PROTECT].
Write-protect switch
PROTECT
Basic shooting operations (P2 card) (continued) P2
Checking photos taken (REC CHECK)
In the shooting pause mode, press the REC
CHECK button.
A few seconds of the last thing you shot play.
• Note that this REC CHECK portion will also be
recorded to any equipment you have set up to
make backup recordings.
• Only the POWER and START/STOP buttons are
operable during REC CHECK.
• The REC CHECK function does not work when
PC, MCR or DUB has been selected as the
operation mode.
The HD recording(720P/60P) settings are already
made in the default mode.
(To view the current settings, see page 44.)
P2 card access lamps
CAMERA mode (MCR)
Lights green: Data can be saved onto the cards or
loaded from them.
Blinks green (slow): No available space on card,
card is write-protected
Lights orange: Slot that is the object of recording
Blinks orange : Data is now being accessed.
Blinks orange (fast): A card is now being
recognized.
Both lamps blink orange: Ejection of card during
access
Off: Cards have not been inserted or formatted.
Insertion of incompatible card.
PC mode (USB DEVICE)
Blinks orange: Data is now being accessed.
Off: A status other than access underway.
PC mode (1394 DEVICE)
Blinks orange: Connected
Off: Not connected
PC mode (1394 HOST)
Lights green: Access standby.
Blinks orange: Data is now being accessed.
Off: Cards have not been inserted or formatted.
Insertion of incompatible card.