Formatting p2 cards, Recording times, Formatting p2 cards recording times – Panasonic AG-HVX200 User Manual

Page 27

Advertising
background image

Shooting

27

P2

Card model

Capacity

DVCPRO/DV

2-channel

audio

DVCPRO50

4-channel

audio

DVCPRO HD

1

DVCPRO HD

720P/24PN

DVCPRO HD

720P/30PN

AJ-P2C004HG

4 GB

approx. 16 min.

approx. 8 min.

approx. 4 min.

approx. 10 min.

approx. 8 min.

AJ-P2C008HG

8 GB

approx. 32 min. approx. 16 min.

approx. 8 min.

approx. 20 min. approx. 16 min.

AJ-P2C016RG

16 GB

approx. 64 min. approx. 32 min. approx. 16 min. approx. 40 min. approx. 32 min.

AJ-P2C032RG

32 GB

approx. 128 min. approx. 64 min. approx. 32 min. approx. 80 min. approx. 64 min.

Recording times

• The AJ-P2C002SG (2 GB) card cannot be used.
• The displayed available space includes the management area, and so the space available for recording is

smaller than this.

• Concerning the division of clips recorded on P2 cards
When using a P2 card of at least 8 GB in this camera, if the continuous recording time for a single

session exceeds the time shown in the following table, recording will be automatically resumed as a
different clip. When performing a thumbnail operation (display, delete, restore, copy, etc.) on clips using
P2 cards, you can operate them as a single clip. When you are using non-linear editing software and a
PC, for example, the clips are displayed individually.

• When using any other types of cards, the driver installed in the camera-recorder may need to be updated.

(Page 126)

• For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the

following Web sites.

https://eww.pavc.panasonic.co.jp/pro-av/

1

Press the mode button and set it to MCR

mode (the MCR/VCR lamp lights).
• Thumbnails are displayed.

2

Press the MENU button.

CAMERA

MCR

VCR

DUB

PC

SET

MENU

MENU button

Mode button

Mode lamp

Operation
button

Recording Format

Recording times

DVCPRO HD∗

1

approx. 5 min.

DVCPRO50

approx. 10 min.

DVCPRO/DV

approx. 20 min.

Formatting P2 cards

3

On the menu, select OPERATION and then

FORMAT. (Page 70)
• A screen such as the one shown below

appears. Select the number of the slot
into which you inserted the P2 card to
be formatted. Select EXIT to cancel the
formatting.

• When you press the MENU button, the menu

display disappears.

4

Select YES on the confirmation screen.

• The selected P2 card is formatted.

∗1 The 720P/30PN and 720P/24PN formats are not

included in the DVCPRO HD recording format.

Advertising