Panasonic AG-HVX200 - Manual (Page 80)

80
S-VIDEO
IN/OUT
COMPONENT
OUT
VIDEO
IN/
OUT
IN/
OUT
AUDIO
CH1
CH2
S-VIDEO
IN/OUT
COMPONENT
OUT
VIDEO
IN/
OUT
IN/
OUT
AUDIO
CH1
CH2
Video deck (Dubbing)
When a component video cable is used for the connection, only the output signals from the unit
will be available.
S-video cable
(optional)
VCR
Connect to the output terminal on the
external device when the video signals and
audio signals of an external device are to be
input to the unit. (Tape mode only)
Connect to the input terminal on the external
device when the unit’s video signals and
audio signals are to be output to an external
device.
• Except when performing audio dubbing on
existing recordings, audio signals cannot be
recorded unless video signals are input to the
S-VIDEO IN/OUT connector and/or VIDEO
IN/OUT jack.
• The signals of the S-VIDEO IN/OUT terminal
take priority over the signals of the VIDEO IN/
OUT terminal.
TV/Monitor (playback/dubbing)
When a component video cable is used for the connection, only the output signals from the unit
will be available.
Video cable
(optional)
TV/Monitor
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
Connect one of these
cables to the terminal on
the video deck.
Video cable (optional)
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
Component video
cable (included)
Component video
cable (included)
Connect one of these
cables to the terminal on
the television.
S-video cable
(optional)
• When the COMPONENT OUT connectors and the S-VIDEO OUT or VIDEO OUT connector have been
connected concurrently, the COMPONENT OUT connectors take priority. Signals cannot be output
through both sets of connectors at the same time.
• When connecting the camera to another device using the component video cable, if the terminal on the
device to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.
Connecting external units (continued)