Panasonic TQBJ0323-1 - Manual (Page 22)

Basic operations
22  ENGLISH
Turn the projector ON or OFF (continued)
TURN THE PROJECTOR ON
STANDBY TT
(R)
ON(G)
AUTO
SETUP
MENU RETURN
ENTER
FREEZE
AV AA
MUTE
2)
Before switching on the projector, make sure all the other devices are correctly connected and remove the Lens
cover. ( page 18)
1 Connect the power cord. ( page 20)
After a while the “power indicator” lights or
flashes in red.
2 Press the POWER button.
POWER • indicator flashes green several times
before it lights up and the STARTUP LOGO is
displayed. See STARTUP LOGO in DISPLAY
OPTION menu. ( page 36)
NOTE:
Confirm that • CONTROL PANEL (when operating with
the projector body) or REMOTE CONTROLLER (when
operating with the remote control) under CONTROL
DEVICE SETUP in the SECURITY menu is set to ENABLE.
(  page 44)
When setting the SECURITY menu, you will be asked to
input the password. (  page 42)
When starting up the projector, some small rattling or •
tinkling sound may be heard. These are normal and will not
affect the performance of the projector.
When the internal cooling fan is operating, some operational •
sound may be heard. The loudness of the operational
sound depends on the external temperature.
If • INITIAL START UP (PROJECTOR SETUP menu) is set
to ON, the projector starts projecting when the power cord is
connected to a wall outlet. (  page 39)
If the projector is turned on again while the internal cooling •
fan is still operating by the internal power supply, the display
may flicker due to the specifications of the lamp. These are
normal and will not affect the performance of the projector.
POWER indicator