Panasonic KX-FP343HK - Manual (Page 46)

8. Programmable Features
44
L This feature is not available for broadcast
transmission.
L The calling charge may be higher as the
transmission speed is slowed down.
“ON”: After transmission, this feature will turn off
automatically.
“OFF” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select “ON”.
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
8. Enter the transmission start time.
L Press {*} to select “AM” or “PM”.
9. Press {SET}.
10. Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=ON
[
±]
“ON” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 20).
“OFF”: The unit will not print the Caller ID list, but
keep records of the last 30 caller information.
Code #27: Setting the black list function
BLACK LIST
=OFF
[
±]
See page 31 for details.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
=OFF
[
±]
See page 32 for details.
Code #34: Setting the quick scan
QUICK SCAN
=OFF
[
±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
cancelled and this feature will be turned off
automatically.
“ON”: The unit will scan the document and store it
into memory first, then the unit will start sending
or copying.
“OFF” (default): Deactivates this feature.
Code #36: Receiving oversized documents
RCV REDUCTION
=92%
[
±]
If the size of the document sent by the other
party is as large as, or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[
±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON
[
±]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
L This code is also used to receive a voice
message and a fax in the same call (page
30)(KX-FP343 only).
1. Press {MENU}.
Setting Recording
paper size Original
document
size
100% A4 Letter
92%
(default) A4 A4
86% A4 A4
72% A4 Legal
FP343-363HK.book Page 44 Thursday, July 31, 2003 2:45 PM