NXP Semiconductors TFA9812 - Manual (Page 35)

TFA9812_2 © NXP B.V. 2009. All rights reserved.
Preliminary data sheet Rev. 02 — 22 January 2009 35 of 66
NXP Semiconductors
TFA9812
BTL stereo Class-D audio amplifier with I 2 S input
9.5.6 PWM signal control
Table 40. Default configuration equalizer for f
s
= 44.1 kHz
Band A1/B1 A2/B2 A3/B3 A4/B4 A5/B5 C1/D1 C2/D2 C3/D3 C4/D4 C5/D5
Frequency
(Hz) 31 63 125 250 500 1000 2000 4000 8000 16000
Q-factor 1 1 1 1 1 1 1 1 1 1
Gain (dB) 0 0 0 0 0 0 0 0 0 0
Table 41. Register 2Ch: PWM signal control
Bit 15 14 13 12 11 10 9 8
Symbol RSD RSD RSD RSD RSD RSD RSD RSD
Default 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
Symbol RSD PLIM1 PLIM0 PW_OFF PW_SF1 PW_SF0 PW_CL1 PW_CL0
Default 0 0 0 0 0 1 0 1
Table 42. Bit description address 2Ch
Bit Symbol Description
7 GAIN +24 dB gain boost:
0 = Gain boost 0 dB
1 = Gain boost +24 dB
6 to 5 PLIM[1:0] Output power limitation:
0 = Maximum power
1 = Maximum power
−
1.5 dB
2 = Maximum power
−
3.0 dB
3 = Maximum power
−
4.5 dB
4 PW_OFF Hard mute control:
0 = No hard mute
1 = Hard mute enabled, implemented by PWM signal
with 50 % duty cycle
3 to 2 PW_SF[1:0] PWM switching frequency:
0 = 350 kHz
1 = 400 kHz
2 = 700 kHz
3 = 750 kHz
1 to 0 PW_CL[1:0] PWM clip level:
0 = < 0.5 % THD
1 = 10 % THD
2 = 20 % THD
3 = 30 % THD