National Instruments RT Series - Manual (Page 28)

Appendix A Specifications
RT Series DAQ Device User Manual A-2 ni.com
Power Requirement
PCI-7030 only
(without daughterboard) .........................1.9 A at +5 VDC (±5%)
PXI-7030 only
(without daughterboard) .........................2.0 A at +5 VDC (±5%)
Note To calculate the total power requirement, add the processor board requirement from
this section to the I/O board requirement given in the I/O board manual.
Physical
Dimensions (Not Including Connectors)
PCI-7030.................................................312.9 by 160.5 cm
(12.3 by 4.2 in.)
One PCI slot
PXI-7030 ................................................16 by 10 cm
(6.3 by 3.9 in.)
Two PXI slots
Environment
Operating temperature ............................0 to 55 °C
Storage temperature ................................–20 to 70 °C
Relative humidity ...................................10% to 90% noncondensing
RTSI
Refer to the RTSI section of Chapter 3, Hardware Overview for
information about real-time system integration.
I/O Daughterboard Specifications
Refer to the appropriate I/O device manual, listed in Table 1-1, RT Series
DAQ Device and Corresponding DAQ Device Manual , for more
information about I/O daughterboard specifications.