Part names and functions, Continued, Remote control functions – NEC 50XC10 User Manual
Page 14
English
English-11
Part Names and Functions
- continued
1) POWER ON/STANDBY
Switches the power on/standby.
*If the Power Indicator on the display is not glowing,
then no controls will work.
2) VIDEO
Switches the input signal to the VIDEO source.
3) RGB
Switches the input signal to the RGB source.
4) DVD/HD
Switches the input signal to the DVD/HD source.
5) PICTURE MODE
Selects Picture Mode: [STANDARD], [BRIGHT],
[CINEMA1], [CINEMA2], [DEFAULT].
STANDARD: for viewing in a bright room
BRIGHT: brighter picture than STANDARD
CINEMA1, 2: for viewing in a dark room, good for
movies
DEFAULT: factory default settings
6) SIZE
Set the aspect ratio of the image.
7) KEYPAD
Set REMOTE ID.
8) DISPLAY
Turn on/off the Information OSD.
9)
Move selection up or down
10) AUTO SETUP
Adjusts the CLOCK PHASE, CLOCK, and POSITION
settings automatically. (Analog RGB signal input only)
11) POINTER
Turn on/off the pointer.
12) VOLUME
Increases/Decreases sound level.
13) SPLIT SCREEN
PIP: Picture-in-Picture mode.
S BY S: Side-by-side mode.
SINGLE: Returns to normal mode.
SWAP: Swaps the Split Screen images.
SELECT/FREEZE: Selects which input is active when
in split screen mode.
When the PICTURE FREEZE function (see OSD
FUNCTION) is operating, SELECT/FREEZE can be
used to display still pictures on the sub screen.
CAPTURE : Captures still picture.
14) REMOTE ID
Activates REMOTE ID function.
15) MENU
Turns ON/OFF menu mode.
16) SET
Makes selection.
17) - , +
Increases or decreases amount of adjustment.
18) EXIT
Goes to the previous menu.
19) ZOOM
Enlarges or reduces the picture.
20) MUTE
Mutes audio output.
21) SLEEP
Sleep timer.
22) PICTURE MEMORY
Switches memory settings from 1 to 6.
PICTURE
MEMORY
POWER ON
RGB
DVD/HD
VIDEO
PICTURE
MODE
DISPLAY
AUTO
SET UP
VOL
SPLIT SCREEN
REMOTE ID
SWAP
SET
RESET
REMOTE CONTROLLER RU-M113
SLEEP
SELECT/FREEZE CAPTURE
PIP
S BY S
SINGLE
MUTE
ZOOM
POINTER
EXIT
MENU
SIZE
STANDBY
1
2
3
4
5
6
7
8
0
9
SET
+
+
+
1
2
3
4
5
6
8
9
7
10
13
11
14
15
16
18
20
19
21
22
17
12
Remote Control Functions