NEC 50XC10 - Manual (Page 17)

English-14
On-Screen Display (OSD)
Using the OSD
Use the Remote Control or the control panel on the front
of the unit to enter the on-screen display menu to adjust
settings.
1. Press the MENU button on the remote or the EXIT
button on the Control Panel.
2. Use the up and down buttons to select the desired menu.
3. Press the SET button to select a sub-menu or item for
adjustment.
4. Change the setting or adjustment by pressing the + and
- buttons on the Control Panel or the Remote Control.
5. Press the EXIT button on the Remote Control, on the
Control Panel to return to the previous menu.
NOTE: Not all menu functions may be available. To access
all functions the Advanced OSD option must be
turned on in the ADVANCED OSD menu.
Press UP or DOWN
button to select
sub-menu. Press SET. Press UP, DOWN, PLUS,
or MINUS to select the
function or setting to be
adjusted. Press MENU or EXIT.
Press UP or DOWN
button to select. Press INPUT
button to decide. Press UP, DOWN, PLUS,
or MINUS to select. Press EXIT.
Remote
Control
Control
Panel
OSD Screen
ADVANCED OSD is OFF. Not all OSD functions will be
available when the ADVANCED OSD is off. Advanced OSD is ON. All OSD functions are shown, but
some OSD functions may not be available.
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
FILM MODE
PICTURE MODE OFF
OFF
HIGH
ON
STANDARD
VGA
PICTURE
4&- .&/6
4&- $-04&
FUNCTION SCREEN
FUNC .
INFO SET UP
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
FILM MODE
PICTURE MODE
GAMMA
SET UP LEVEL
COLOR CONTROL OFF
OFF
HIGH
ON
STANDARD
2.2
0%
VGA
PICTURE
FUNCTION
FUNC .
INFO SET UP SCREEN
4&- .&/6
4&- $-04&