NEC 50XC10 - Manual (Page 19)

English-16
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
AUDIO BASS Adjusts the low frequency sound. Press + or - to adjust. 0 YES
TREBLE Adjusts the high frequency sound. Press + or - to adjust. 0 YES
BALANCE Adjusts the balance of L/R volume. Press + or - to adjust. 0 YES
AUDIO INPUT1 Select which audio input to use with the video source. VIDEO1 YES
AUDIO INPUT2 DVD/HD1 YES
AUDIO INPUT3 VGA YES
DVD/HD3 INPUT HDMI YES
SCREEN ASPECT MODE Selects aspect ratio of the displayed image. Press + or - to select. - -
V-POSITION Controls the vertical position of the image within the Display area
of the PDP.
Press + to move up. Press - to move down. 0 YES
H-POSITION Controls the horizontal position of the image within the Display
area of the PDP.
Press + to move right. Press - to move left. 0 YES
V-HEIGHT Adjusts the vertical size of the image. 0 YES
H-WIDTH Adjusts the horizontal size of the image. 0 YES
AUTO PICTURE ON: H-Position, V-Position, Clock and Clock Phase are adjusted
automatically.
OFF: H-Position, V-Position, Clock and Clock Phase are adjusted
manually.
VGA input only. OFF NO
CLOCK PHASE Adjusts the visual “noise” on the image.
VGA input only. 0 YES
CLOCK Press + to expand the width of the image on the right of the
screen.
Press - to narrow the width of the image on the left.
VGA input only. 0 YES
UNDER SCAN
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled. ON: UNDERSCAN is selectable in the ASPECT MODE menu.
OFF: UNDERSCAN item is not selectable in the ASPECT MODE
menu.
Video signal input only. OFF YES
SET UP
Some functions
available only
when the
Advanced OSD
function in the
FUNCTION
menu is
enabled.
The
LANGUAGE
and ALL
RESET
functions
are always
available.
LANGUAGE Select the language used by the OSD. ENGLISH NO
DVD/HD1 INPUT Selects whether to set the input of the DVD/HD1 connector.
COMPONENT : for Component input. (3BNC connectors)
SCART1 : for SCART input (3RCA connectors and VIDEO1 input)
(SCART1 available for Europe and World-Wide models only) COMPONENT YES
D-SUB INPUT Selects whether to set the input of the mini D-SUB connector.
RGB : for RGB input
SCART2 : for SCART input
(SCART2 available for Europe and World-Wide models only) RGB YES
HD SELECT Selects signal detection for similar 1080I signal manually.
1080I : Standard digital broadcasts
540P : Special digital broadcasts ( ex. DTC100 ) 1080I NO
RGB SELECT If there is a problem with signal detection, this function forces the
monitor to display the signal at the desired resolution.
If no problem is detected, the only available option will be “AUTO”.
VGA input only. AUTO YES
HDMI MODE Choose the HDMI mode based on the input device connected via
HDMI connector.
When a DVD player or similar equipment is connected, sets to
"HIGH".
When a PC or similar equipment is connected, sets to "LOW". HIGH NO
DVI MODE PLUG/PLAY Choose the DVI mode based on the input device connected via
DVI connector and set the black level.
When a PC or similar equipment is connected, PLUG/PLAY is
"DVI-PC" and BLACK LEVEL is "LOW".
When a DVD player or similar equipment is connected, PLUG/
PLAY is "DVI-HD" and BLACK LEVEL is "HIGH". DVI-PC NO
BLACK LEVEL LOW NO
COLOR SYSTEM The selected Color System depends on the video format of the
input signal.
VIDEO input only. AUTO NO