NEC 50XC10 - Manual (Page 20)

English
English-17
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
SET UP
(continued) BACK GROUND Chooses the brightness of background when there is no input
signal present. GRAY YES
SIDE MASK Adjusts the color of the side mask when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker. 3 YES
OSD DISPLAY OSD ON: Information about inputs, screen size, etc. is shown.
OFF: No information is shown. ON YES
OSD
POSITION Change the position of the menu between TOP LEFT and BTM
RIGHT. Press + or - to adjust. TOP LEFT YES
OSD ORBITER ON: The menu position intermittently shifts eight dots while the
OSD is being displayed.
OFF: The menu position does not shift. ON YES
OSD TRANSP. Adjusts the transparency level of the OSD.
Press + or - to adjust. 70% YES
MONITOR ID Sets the monitor ID number from 1-26 or to "ALL". ALL YES
ALL RESET Resets settings back to factory default values. OFF -
FUNCTION
Some functions
available only
when the
Advanced OSD
function in the
FUNCTION
menu is
enabled.
The
ADVANCED
OSD function
is always
available.
ADVANCED OSD ON: All menu items are shown for advanced users.
OFF: Some of the advanced menu items are not shown. OFF YES
POWER SAVE Sets how long the monitor waits to go into power save mode after
a signal is lost.
VGA and DVI input and Separate HV sync. only. OFF YES
INPUT SKIP Skips to next input if present input is no signal.
This function is valid only for INPUT key on the display. OFF YES
SUB PICTURE SUB
P.DETECT This function automatically detects no input signal of sub screen.
This feature is available only picture-in-picture mode.
SUB P. DETECT: Sets availability of automatic detecting of sub
screen.
DISPLAY: Sets the appearance method of the sub screen.
SUB P. RATE: Sets the transparency of the sub screen. AUTO YES
DISPLAY NORMAL YES
SUB P.RATE 100% YES
ZOOM NAV Sets the position of the zoom navigation image. BTM LFT YES
PICTURE FREEZE Sets the position of the captured still picture. S BY S1 YES
SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image
Persistence.
PEAK BRIGHT : The brightness is decreased depending on
setting.
ORBITER : The screen image moves slightly with squeezing or
expanding.
INVERSE : The screen image is displayed alternately between
positive image and negative image, or the screen image is
displayed full white. MANUAL YES
PEAK BRIGHT 100% YES
ORBITER AUTO1 YES
INVERSE/
WHITE OFF YES
CLOSED CAPTION
(U.S. models only) Chooses the closed caption setting. OFF YES
CAPTION CONT
(U.S. models only) Chooses the brightness of the closed caption. NORMAL YES
INPUT DETECT INPUT Sets the input mode and the sound volume when the power turn
on.
LAST : last mode (the input that was last selected when the power
turn off.)
MULTI to DVI : fi xed input mode.
AUTO : Searches the input with the signal automatically
PRIORITY : Sets the priority input for AUTO setting. LAST YES
VOLUME LAST YES
PROTOCOL SET Sets protocol setting of RS-232C.
OFF : When NEC protocol is used (normal).
ON : When special protocol is used.
* Consult your dealer for details of protocol. OFF YES
RS232C CONTROL Selects the mode of the monitor when using the RS-232C daisy
chain. NORMAL YES
SIGNAL INFORMATION Display signal information such as frequencies, polarities, etc. - -