Nikon S1200PJ - Manual (Page 104)

86
Displaying Pictures with the Projector
U
sin
g
th
e Projec
tor
b Projecting Slide Shows
Project pictures stored in the internal memory or on the memory card as an
automated slide show.
The operations described below can be performed using the camera or the
remote control (available separately) (
A 4).
1
Turn on the camera, and open the projector cover.
• Use favorite pictures mode, auto sort mode, or list by date mode when you want to
be more specific about which pictures to project.
2
Press the
d button.
• The playback menu is displayed.
3
Use
H or I of the multi selector or the remote control to select Slide
show, and press the k (apply selection) button.
• To change the slide show settings when the projector is in operation, select Slide
show, and then select Effects, Background music or Frame intvl, and press the
k
button ( E 51).
4
Check the camera position and focus with the standby screen.
• Follow steps 3 and 4 under “Displaying Pictures with the Projector” (A 80) to adjust
camera position and focus.
5
Use
H or I to select Start and press the k (apply
selection) button.
• If you start without applying slide show settings in step 3, the slide
show begins with the previously made settings.
• You can start the slide show without projecting the menu screen
(steps 2 to 3) by pressing the b button on the remote control while
in full-frame playback mode or thumbnail playback mode.
6
The slide show begins.
• While the slide show is in progress, press the K button on the camera or the remote
control to display the next picture or the J button to display the previous picture.
Hold down the button to advance or rewind the slide show.
• During a slide show with Background music, the volume can be adjusted by
rotating the zoom control on the camera, or by pressing the zoom buttons on the
remote control.
• To pause the slide show, press the k (apply selection) button.