Nikon S1200PJ User Manual

Page 211

Advertising
background image

Troubleshooting

F

7

Te
ch
n

ical N

o

te

s an

d In

de
x

Monitor is blank.

• Camera is off.
• Battery is exhausted.
• Standby mode for saving power. Press the

power switch, shutter-release button, A
button,

c button, or b (e movie-record)

button.

• When flash lamp blinks red, wait until flash

has charged.

• Camera and computer are connected via

USB cable.

• Camera and TV are connected via audio/

video cable.

• The monitor turns off, while the projector is

in operation.

23
22
23

54

72

72,

E 21

80

Monitor is hard to read.

• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.

98,

E 64

F 5

Date and time of recording
are not correct.

• If camera clock has not been set, “Date not

set” indicator blinks with shooting and movie
recording. Pictures and movies recorded
before clock is set are dated “00/00/0000
00:00” or “01/01/2011 00:00” respectively. Set
the correct time and date from the Time
zone and date
option in the setup menu.

• Check camera clock regularly against more

accurate timepieces and reset as required.

24,

E 61

25,

E 61

No indicators displayed in
monitor.

Hide info is selected for Photo info.
Select Show info.

98,

E 64

Print date not available.

Camera clock has not been set.

24,

E 61

Date not appearing on
pictures even when Print
date
is enabled.

The current shooting mode is one that does
not support Print date.

99,

E 66

Screen for setting time
zone and date is displayed
when the camera is turned
on.

Clock battery is exhausted; all settings were
restored to their default values.

24, 25

Camera settings reset.

Problem

Cause/Solution

A

Advertising