Troubleshooting, Display, settings and power supply – Nikon S1200PJ User Manual
Page 210
F
6
Te
ch
n
ical N
o
te
s an
d In
de
x
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Battery inserted into the
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in
the setup menu.
• When charging by connecting the camera to
a computer, battery charging stops when
the camera is turned off.
• When charging by connecting the camera to
a computer, battery charging stops when
the computer is suspended (sleeping), and
the camera may turn off.
• Depending upon computer specifications,
settings, and status, it may be impossible to
charge the battery inserted into the camera
via computer connection.
–
Camera cannot be turned
on.
• Battery is exhausted.
• When connecting to an electrical outlet
using a Charging AC Adapter, the camera
cannot be turned on.
Camera turns off without
warning.
• Battery is exhausted.
• Camera has turned off automatically to save
power.
• The camera has become hot due to the heat
of the projector. Leave the camera off until it
has cooled and then turn it on again.
• The camera and battery may not work
properly at low temperatures.
• The camera turns off if the Charging AC
Adapter is connected while the camera is on.
• The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.