Remove the memory card, Switch the device on and off, Charge the battery – Nokia MOBILE PHONE N86 User Manual
Page 13: Get started
4 Close the back cover. Ensure that the cover is properly
closed.
Remove the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1 Before you remove the card, press the power key, and
select
Remove memory card
. All applications are
closed.
2 When
Removing memory card will close all open
applications. Remove anyway?
is displayed, select
Yes
.
3 When
Remove memory card and press 'OK'
is
displayed, remove the back cover of the device.
4 Press the memory card to release it from the slot.
5 Pull out the memory card. If the device is switched on,
select
OK
.
6 Replace the back cover. Ensure that the cover is
properly closed.
Switch the device on and off
To switch on the device:
1 Press and hold the power key.
2 If the device asks for a PIN code or lock code, enter it,
and select
OK
. The preset lock code is 12345. If you
forget the code and your device is locked, your device
will require service and additional charges may apply.
For more information, contact a Nokia Care point or
your device dealer.
To switch off the device, press the power key briefly, and
select
Switch off!
.
Charge the battery
Your battery has been partially charged at the factory.
There may not be a need to charge the battery in advance.
If the device indicates a low charge, do the following:
13
Get started