Route guidance, Retrieve position information, Trip meter – Nokia MOBILE PHONE N86 User Manual

Page 71: Positioning (gps)

Advertising
background image

Route guidance

Select

Menu

>

Applications

>

GPS data

and

Navigation

.

Start the route guidance outdoors. If started indoors, the

GPS receiver may not receive the necessary information

from the satellites.
Route guidance uses a rotating compass on the device

display. A red ball shows the direction to the destination,

and the approximate distance to it is shown inside the

compass ring.
Route guidance is designed to show the straightest route

and the shortest distance to the destination, measured in

a straight line. Any obstacles on the route, such as

buildings and natural obstacles, are ignored. Differences

in altitude are not taken into account when calculating the

distance. Route guidance is active only when you move.

To set your trip destination, select

Options

>

Set

destination

and a landmark as the destination, or enter

the latitude and longitude coordinates.

To clear the destination set for your trip, select

Stop

navigation

.

Retrieve position information

Select

Menu

>

Applications

>

GPS data

and

Position

.

In the position view, you can view the position

information of your current location. An estimate of the

accuracy of the location is displayed.

To save your current location as a landmark, select

Options

>

Save position

. Landmarks are saved locations

with more information, and they can be used in other

compatible applications and transferred between

compatible devices.

Trip meter

Select

Menu

>

Applications

>

GPS data

and

Trip

distance

.

The trip meter has limited accuracy, and rounding errors

may occur. Accuracy can also be affected by availability

and quality of GPS signals.

To turn trip distance calculation on or off, select

Options

>

Start

or

Stop

. The calculated values remain on

the display. Use this feature outdoors to receive a better

GPS signal.

To set the trip distance and time and average and

maximum speeds to zero, and to start a new calculation,

select

Options

>

Reset

. To set the trip meter and total

time to zero, select

Restart

.

71

Positioning (GPS)

Advertising