Nokia MOBILE PHONE N86 - Manual (Page 142)

You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select Options > Server
profiles > Options > New server profile .
You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name — Enter a name for the configuration server.
Server ID — Enter the unique ID to identify the
configuration server.
Server password — Enter a password to identify your
device to the server.
Access point — Select the access point to use for the
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet as the bearer type.
Host address — Enter the web address of the
configuration server.
Port — Enter the port number of the server.
User name and Password — Enter your user ID and
password for the configuration server.
Allow configuration — Select Yes to allow the server to
initiate a configuration session.
Auto-accept all requests — Select Yes if you do not want
the server to ask for your confirmation when it initiates a
configuration session.
Network authentication — Select whether to use http
authentication.
Network user name and Network password — Enter
your user ID and password for the http authentication.
This setting is available only if you have selected Network
authentication to be used.
To connect to the server and receive configuration settings
for your device, select Options > Start configuration .
To view the configuration log of the selected profile, select
Options > View log .
To update the device software over the air, select
Options > Check for updates . The update does not erase
your settings. When you receive the update package on
your device, follow the instructions on the display. Your
device is restarted once the installation is complete.
Downloading software updates may involve the
transmission of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
142
Se
ttings