National Instruments CAN 372139B-01 - Manual (Page 207)

Chapter 6 Automotive Diagnostic Command Set API for C
© National Instruments Corporation 6-43 Automotive Diagnostic Command Set User Manual
ndEnableNormalMessageTransmission
Purpose
Executes the EnableNormalMessageTransmission service. The ECU starts transmitting its
regular communication messages (usually CAN messages).
Format
long ndEnableNormalMessageTransmission(
TD1 *diagRef,
LVBoolean *requireResponse,
LVBoolean *success);
Input
diagRef
Specifies the diagnostic session handle, obtained from ndOpenDiagnostic and passed
to subsequent diagnostic functions. Normally, it is not necessary to manually manipulate
the elements of this struct.
requireResponse
Indicates whether a response to this service is required. If *requireResponse is
FALSE, no response is evaluated, and success is always returned TRUE. This
parameter is passed by reference.
Output
success
Indicates successful receipt of a positive response message for this diagnostic service.
Return Value
The return value indicates the function call status as a signed 32-bit integer. Zero means the
function executed successfully. A negative value specifies an error, which means the function
did not perform the expected behavior. A positive value specifies a warning, which means the
function performed as expected, but a condition arose that may require attention.
Use the ndStatusToString function to obtain a descriptive string for the return value.