Network Computing Devices NCDWare 9300572 Rev. B - Manual (Page 12)

11
13. If NFS is running on the host, specify the file service method you
want to install. If NFS is not running on the host, go to Step 14.
If you select NFS and install on a local file system, ncdinstall
exports the file system for you. If you select NFS and install on a
remote or NFS -mounted file system, you must export the file
system from the remote host. Use the df command to determine
if your file system is local or remote.
Note For full functionality of the NCD Mosaic Browser, select
NFS as the file service. If you select TFTP as the file service,
some browser features are not available. Refer to the
System Administrator’s Guide for UNIX Systems for further
information.
14. Before beginning the installation, ncdinstall checks available disk
space in the TFTP directory. If space is inadequate, ncdinstall tries
to install in the installation directory. If the installation directory
has enough space,
ncdinstall relocates the TFTP directory to the
installation directory. If there is not enough room in the
installation directory,
ncdinstall reports how much space is
available and how much more is needed.
Select whether you want to continue anyway (which usually
results in an unsuccessful installation); or press
t to return to the
Install NCDware menu to select to install fewer files; or press
q to quit to free enough space for the installation.