Network Computing Devices NCDWare 9300572 Rev. B - Manual (Page 14)

13
Prepare Host Services for Terminal Booting
16. From the Main Menu, select 2 Prepare System Services .
ncdinstall checks that BOOTP , TFTP or NFS , a login service, and the
license management services are available. If any service is not
running,
ncdinstall attempts to start it.
17. If the file access method is NFS , specify whether you want to
install the NCD Display Manager ( ncddm ). Type n for no or press
Return for yes.
The
NCD Display Manager provides user ID , group ID , and
environment information to the NCD Mosaic Browser.
Add Terminals to the Network
18. From the Main Menu, select 3 Configure NCD Terminals.
19. From the Configure NCD Terminals menu, select
1 Add NCD Terminal .
20. Supply the model, IP address, Ethernet address, hostname,
subnet mask, and gateway for each terminal you are installing.
21. Verify your input and correct any errors.
22. Specify whether you want to use the terminal as an
NFS server
(type y for yes or press Return for no).
23. Specify whether you want to export a local file system on a
floppy drive or a PCMCIA card or both. Type 1 to export a
PCMCIA card file system, 2 for a floppy file system, or all for
both.