Network Computing Devices NCDWare 9300572 Rev. B User Manual
Page 18
17
5. The Select Services dialog box appears. The default selections
are
TFTPD
and
BOOTP
. Select
Next
to accept the defaults.
If your system has another version of
TFTP
installed, you are
prompted to make the following choice:
❏
If you want to use the version of
TFTP
that you have
installed, or you are using an
NFS
server, clear the default
selection. Then select
Next
.
❏
If you want to install
NCD
’s current version of
TFTP
software,
select
Next
.
6. Choose the
TFTP
root directory path. The default root directory
path is c:\tftpboot. Type a new path or accept the default. Select
Next
.
7. A dialog box reports that the
TFTP
software is installed and that
you need to restart the computer. You should restart the
computer when you finish installing all of the components.
Select
Ok
to continue the installation.
8. The Select Components Dialog box reappears.
Install
NCDware
is the default. Select
Next
to install
NCD
ware.
9. Choose the default destination path for installing
NCD
ware,
c:\tftpboot
, or type the path you wish to use. Select
Next
.
10. The screen displays a list of items to install. Make sure only the
correct items are selected. Select
Next
to continue.
11. The screen lists the
NCD
terminals for which you can install
software. Make sure only the correct terminals are selected.
Select
Next
.