Nortel T7406 - Manual (Page 30)

30 / Handset Configuration
P0942257 04
Using the Handset Display Buttons
The T7406 handset has a three-line display.
The three display buttons located under the display are used to interact
with the handset menus and the feature code messages that appear on the
display.
• The first line of
the display
shows handset
messages and
menu items.
• The second
line displays
button labels in
capital letters.
• The third line displays the antenna/signal strength icon and the
battery charge icon.
Configuring the First Handset to a Base Station
When you configure a handset to a new base station, you must ensure
the base station receives the assigned security code. For subsequent
handsets, the security code must be identical, but it does not need to be
re-assigned to the base station.
Other settings are the same for all handsets.
Configuring the Handset ID Number
Each of the three handsets registered to a base station share an identical
Security code, but each handset has a unique Set ID of 1, 2, or 3.
Follow these steps to set the handset ID and new password:
1. Press the Options button.
2. Press SHOW .
3. Press NEXT until the display shows 6. Handset ID .
4. Press SHOW .
The display shows the current Handset ID #.
• If this is the correct number, press OK and continue with
the next section.
YES NO EXIT
Feature message
Button label
Display icons
Display button
Ring Again?