Nortel T7406 - Manual (Page 43)

Make and Answer Calls / 43
T7406 Installation Guide
Hold calls
To retrieve a held call, press the button where the call is on hold. Calls
are automatically placed on hold when you switch from one line to
another.
To hold a call:
1. Press ≥ while on a call. The line button flashes.
2. Press the flashing button to retrieve a held call.
3. Press ® to end the call.
Mute microphone
To mute the microphone while you are on a call, press the Options
button.
To cancel Mute, press the Options button again.
Note: While Mute is active, if you press any button on the face of the
handset, the display will clear, but Mute will remain active. To
turn off Mute, press the Options/Mute button on the side of the
handset.
Mute only works on the current call. If a second call comes in, and you
want to mute that call, answer the call and press the Options/Mute
button on the side of the handset.
Page
You can use the T7406 cordless handset to make a page announcement.
The handset does not have a loudspeaker so it cannot be paged.
To make a page announcement:
1. Press ≤fl‚ and SETS , SPKR or BOTH to make a General page
The announcement is made over telephone and/or external
speakers to all telephones in system that can receive Pages.
• Press ≤fl⁄ to make an Internal page.
The announcement is made over the telephone speakers
of all telephones in the system that can receive pages.