Nortel T7406 - Manual (Page 37)

Button Mapping on the Handset / 37
T7406 Installation Guide
Button Mapping on the Handset
When you have completed the steps in Handset Configuration on page
27, then, you can map the feature buttons on your set.
The handsets have six feature buttons. These buttons can be
programmed by your system administrator. You can also program the
buttons from your handset. The following section describes the usual
mapping of the buttons, based on the M7310 telephone button mapping.
The illustration below shows examples of the default button mapping
for the handset.
The following two illustrations show the correlation between the T7406
handset buttons and the M7310 and T7316 telephones, which are
standard telephones used for Norstar and Business Communications
Manager systems.
M7310 to T7406
Line 2
Line 1
Call Fwd
Voice call
Intercom
Last No.
M7310 Telephone T7406 Handset