Nortel T7406 - Manual (Page 32)

32 / Handset Configuration
P0942257 04
6. Press OK .
The display shows
Confirm New PWD
.
7. Re-enter the password.
8. Press
OK
.
The display shows PWD Changed! .
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows PWD Error! ,
return to the 7. Chg Password menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will
need to contact your Distributor for help to unlock the set.
Assigning the Security Code
After you assign the handset ID # to a handset, you need to configure
the handset to a base station.
Follow these steps to assign a Security code to the handset.
1. Press the Options button.
2. Press
SHOW
.
3. Press NEXT until the display shows 4. Set S.S. Code : .
4. Press CHANGE to assign a security code to the handset. The display
shows Enter Password .
5. Enter the six-digit password (default 000000).
6. Press OK . The display shows Press 6 digits .
7. Enter the six-digit Security code.
The display changes to show the code as entered.
8. Press OK to accept the code.
The display shows 4. Set S.S. Code : .
If you are assigning a handset to an existing base, your handset is now
connected to the system.