Nortel T7406 - Manual (Page 31)

Handset Configuration / 31
T7406 Installation Guide
• If you want to change the number, follow these steps:
a. Press CHANGE .
The display shows Enter Password . (six digits)
b. Enter the default password (000000).
c. Press OK to accept the code.
The display shows Press Digit 1 - 3. The current
Handset ID # is displayed on the bottom left of the
LCD.
d. Press the digit that you want to assign to this handset.
e. Press OK .
The display shows 6. Handset ID .
Changing the Handset ID Password
After you enter the handset ID, if you want to change the password for
the ID access, follow these steps:
1. Press NEXT until the display shows 7. Chg Password .
Note: This password is used to access the Handset ID option. If
you decide not to change the password, press the Option
button to exit the menu.
2. Press SHOW .
The display shows Enter old PWD .
3. Enter the default six-digit password (000000) or the last password
you entered.
4. Press
OK
.
The display shows Enter New PWD .
5. Enter a new six-digit password.
Note: For ease of administration, it is recommended that you use
the same password as the one you used for the Security
code/S.S. Code.