Nortel Networks NN10300-020 - Manual (Page 11)

Touch panel description 11
•
upgradeable firmware
• wideband audio support
Touch panel description
Point-and-click operations are performed using the touch panel. The touch
panel is used with the graphical user interface (GUI) to present soft keys
directly on the display. Activate all feature keys and soft keys by touching
the item in the display.
The display uses a cold cathode fluorescent lamp (CCFL) for backlighting.
The display is not visible without the backlight, which turns off
automatically after a period of inactivity. You can configure the timeout
period. There is on-off and brightness controls and adjustable contrast.
Figure 2 "Touch panel application area" (page 12) identifies the sections
of the touch panel application area.
Figure 3 "Touch panel tools area" (page 13) identifies the sections of the
touch panel tool area.
Application area
The application area provides feature key and soft key status; date and
time display; caller name and number; menu options, directories, Inbox,
and Outbox information.
The four softkeys allow you to have three softkeys configured to
support features and one softkey to select menu options, see
“Softkey
functionality” (page 14) .
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.