Nortel Networks NN10300-020 - Manual (Page 35)

35
.
Answering calls
Follow these procedures to answer calls. Incoming calls cause the
telephone to sound and the message indicator lamp to flash.
See Figure 1 "IP Phone 2007 components" (page 9) for the location of the
keys.
Answering a call
Follow this procedure to answer a call.
Action
Perform one of these actions to answer a call:
•
Lift the handset.
•
To answer a call using handsfree, press the Handsfree key.
•
To answer a call while wearing a headset, press the Headset
key.
Answering a second call
Follow this procedure to answer a call when you are engaged in a call.
If another call comes in while the primary line is engaged, the phone
sounds and a message indicator icon on the display flashes. While the
indicator is flashing you have the opportunity to put the first call on hold
and answer the second call.
Step Action
1 Press the Hold key to put the active on hold.
2 Press the line key for the second call.
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.