Nortel Networks NN10300-020 - Manual (Page 39)

39
.
While on an active call
Follow these procedures to put a call on hold, transfer a call, use the mute
key, and use the conference call feature.
See Figure 1 "IP Phone 2007 components" (page 9) for the location of the
keys.
Navigation
• “Using call hold” (page 39)
•
“Transferring a call” (page 39)
•
“Using conference call ” (page 40)
• “Using the mute feature” (page 41)
Using call hold
The hold feature allows you to suspend a call without terminating it. Follow
this procedure to use the hold feature.
Step Action
1 To put the call on hold, press the Hold key.
The call is suspended. On the display, an indicator flashes
beside the line on which the call is held.
2 Press the key beside the flashing indicator in the display.
The call is active again.
--End--
Transferring a call
Follow this procedure to transfer a call to another extension.
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.